Miracle Tile Restor, 1lb

Coverage: Coverage will vary depending on density, porosity, texture, surface absorption, weather, time solution is left on the surface and application methods. Used as directed, Tile Restor will cover approximately 80 - 115 square feet per 1-pound container (7 - 11 square meters per pound).
Container sizes: 1-pound, 5-pound and 40-pound containers.

APPLICATION:

Read the entire label and PDS/MSDS before starting.
a. All previous applied sealers, coatings and/or waxes must be removed using Mira Strip or H2O Strip as directed.
b. If the grout is very dirty scrub using GCFR as directed.
c. If the floor is very dirty or old (typically 5 years or more), use Tile Restor, if not proceed directly to Tile Brite as directed.
d. Apply a small amount of water to the tile and grout surface. Work in approximately 25 - 35 square feet at a time. Do not work large areas.
e. Sprinkle a handful of Tile Restor onto the wet surface (approximately 5 ounces per 25 square feet of tile).
f. Buff the Tile Restor creating a slurry with natural hair brush or pad. (A Marble Master or similar floor machine is preferred). Approximately 10 minutes per 25 - 35 square feet of tile.
g. Move slurry aside with a squeegee. Check for desired cleanliness and luster. Work longer if necessary. When the desired cleanliness and luster is achieved, squeegee the Tile Restor slurry to the next section and add Tile Restor and water as needed. DO NOT ALLOW Tile Restor TO DRY ON THE SURFACE.
h. Remove excess slurry with a wet vacuum. Wet the surface with clean water and buff with the same brush or pad. DO NOT ADD MORE Tile Restor. This procedure will remove any residue.
i. Vacuum dry and let air dry.
j. Polish to final luster using Tile Brite as directed.