MiraPolish is a unique, natural, non-wax crème compound for the polishing and restoration of most marble, travertine, limestone, terrazzo, granite and other calcium base natural stone surfaces. When used properly, MiraPolish™ will give a long lasting luster, while removing scratches and etch marks. MiraPolish™ is great for easy ongoing maintenance, as well as the final polishing step in any stone restoration procedure. Heavy scratches and etch marks may need to be removed using Miracle Sealants’ Pre-Dust, Mira Hone or with Pyramid Diamond Abrasives.
MiraPolish is a unique, natural, non-wax crème compound for the polishing and restoration of most marble, travertine, limestone, terrazzo, granite and other calcium base natural stone surfaces. When used properly, MiraPolish™ will give a long lasting luster, while removing scratches and etch marks. MiraPolish™ is great for easy ongoing maintenance, as well as the final polishing step in any stone restoration procedure. Heavy scratches and etch marks may need to be removed using Miracle Sealants’ Pre-Dust, Mira Hone or with Pyramid Diamond Abrasives.
|
Easy To Use Polishing Creme For:
|
|
• Marble
• Travertine
• Limestone
|
• Terrazzo
• Granite
• Calcium Based Stone
|
| SPECIAL FEATURES: |
|
|
• Easy to Use
• Fast Acting
• Cost Effective
• Removes Light Etch Marks
|
• Non Acidic Formula
• Pleasant Scent
• Removes Light Scratches
• Non-Wax Creme |
| |
Coverage: Coverage will vary depending on the density, porosity, texture, surface absorption, time solution left on the surface, weather and application methods. Used as directed, MiraPolish™ will cover approximately 350 – 500 square feet per container (32.5 – 46 square meters).
Container size: 4.5 pound container.
APPLICATION:
Always read the entire label, product data sheet and material data sheet before using. Select an area of about 40 square feet.
a. All previous applied sealers, coatings and/or waxes must be removed using Mira Strip or H2O Strip as directed.
b. If the surface is dirty scrub using Mira Clean #1 as directed.
c. If the floor is very dirty or old (typically 5 years or more), use Liquid Poultice as directed for optimum results.
d. Apply a small amount of water to the surface. Do not work large areas.
e. Apply about a cup of MiraPolish™in the center of the area to be worked.
f. Attach a red, white or natural (hog hair) pad onto the Marble Master MM 1000 floor machine. Buff in a side-to-side motion. The consistency of the slurry should be fluid enough to achieve even coverage over area.
g. If slurry becomes dry, add water as needed.
h. After making several passes, move slurry aside with a squeegee. Check for desired luster. Work longer for additional luster. When the desired luster is achieved, squeegee the MiraPolish™slurry to the next section and add MiraPolish™and water as needed. DO NOT ALLOW MiraPolish™ DRY ON THE SURFACE.
i. Rinse the surface with clean water and remove with a wet vacuum. This procedure will remove any residue.
k. Complete large areas in a checkerboard fashion making sure to overlap sections to blend.
Special Note: MiraPolish™can separate and settle when not in use. Always stir or shake contents well before, during and after use. Replace lid as quickly as possible and ensure the lid is firmly replaced when stored for next use. If MiraPolish™becomes dry before next use, add a small amount of clean water to loosen paste to a workable cream/liquid.
|
Manufacturer: N/A
SKU: N/A
Sign In
