Cleaning for cast surfaces including pre-cast concrete, non-polished natural surfaces including flamed and honed granite, tumbled and honed marble, cleft & hone slate, quarry tile, flamed and honed limestone, unglazed ceramic tile, porcelain tile, cement grout, brick, concrete, mortar and masonry.
Cleaning for cast surfaces including pre-cast concrete, non-polished natural surfaces including flamed and honed granite, tumbled and honed marble, cleft & hone slate, quarry tile, flamed and honed limestone, unglazed ceramic tile, porcelain tile, cement grout, brick, concrete, mortar and masonry.
|
FAST-ACTING PHOSPHORIC ACID CLEANER FOR:
|
|
• Concrete
• Granite
• Non-Polished Natural Stone
• Grout
|
• Quarry Tile
• Brick
• Ceramic & Porcelain Tile
• Masonry Surfaces
|
| SPECIAL FEATURES: |
|
|
• Interior & Exterior Use
• Milder Than Other Acidic Cleaners
• Inexpensive
|
• Fast Acting
• Easy to Use
• Dilutable |
| |
Coverage: 500 - 2,500 square feet per gallon (45 - 230 square meters per 3.785 liters) with standard dilution.
Container sizes: Gallon, quart.
APPLICATION:
Read entire label and PDS/MSDS before using. Thoroughly wet the surface to be cleaned with clean water. Phosphoric Acid Cleaner may be applied with a clean mop or acid resistant brush. Dilute Phosphoric Acid Cleaner 15 parts water to 1 part Phosphoric Acid Cleaner . For stronger solutions, reduce the water down to as low as 3 parts. Allow the solution to dwell on the surface for 1 - 5 minutes while agitating with a brush. Do not allow the solution to dry on the surface. Work in small areas. Extract dirty remains with a wet vacuum system. Multiple applications may be necessary. After extracting Phosphoric Acid Cleaner Solution, rinse thoroughly with clean water. Once the surface has been rinsed, rinse the surface with Mira Clean #1 and clean water (20 - 1) as directed.
If a non-acid deep cleaning is necessary, use Liquid Poultice as directed.
Special Notes:
Acid and the vapors, no matter how mild, may etch, lighten or alter the color of tile, cementious and natural stone surfaces. Repeated acid washing may damage some surfaces. Avoid contact with all metals. Do not mix with ammoniated cleaners as harmful fumes may result. Allow all new grout, concrete, cement or masonry to cure per manufacturer’s specification before using Phosphoric Acid Cleaner .
|
Manufacturer: N/A
SKU: 30.10780
UPC: 753927512155
Sign In
