Coverage: 1,000 - 7,000 square feet per gallon (90 - 630 square meters per 3.785 liters) with recommended dilution ratios.
Container sizes: Gallon, quart.
APPLICATION:
Surface must be dry and free of contaminant, including previously applied sealers, dirt, lime, hard water deposits, efflorescence, rust & other heavy dirt and grime.
Floor Coating/Wax Removal: To remove existing coatings and/or waxes use Mira Strip or H2O Strip per specification.
Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence, rust and other heavy dirt, grease and grime use GCFR (Grout & Concrete Film Remover) or Phosphoric Acid Cleaner following the instructions carefully. For a non-acid deep cleaning, use Liquid Poultice as directed.
Light Cleaning: Use Mira Clean #1 or Counter Kleen as directed.
Application Instructions:
Read entire label and PDS/MSDS before using. Always dry dust mop or sweep area to be cleaned before applying Mira Soap. During the first six months, damp mop the surface with Mira Soap and water on a regular basis by mixing 1 part Mira Soap to 10 parts water. After six months, maintain area by damp mopping with a ratio of 1 part Mira Soap to 20 parts water. When the solution becomes dirty or cloudy, replace it. Do not rinse Mira Soap off the floor. Use as directed in proper solution and allow to dry.