Mira Strip, Quart

Coverage: 200 - 300 square feet per gallon (18 - 27 square meters per 3.785 liters).
Container sizes: Gallon, quart.

APPLICATION:

Read entire label and PDS/MSDS before using. This product should be used directly from container and is not under any circumstances to be thinned or diluted with anything before use. Apply Mira Strip full strength to the surface with a clean mop. Be sure to completely saturate the surface being cleaned. Allow solution to sit on the surface for 10 - 20 minutes agitating periodically with the appropriate stripping pad or brush. Do not allow Mira Strip to dry on the surface. Agitate area one last time while adding more product and removing remains. Remove all Mira Strip from the surface with a wet vacuum or clean, dry towels. More than one application may be necessary to remove accumulated
buildup. Thoroughly rinse completed area with clean water and allow to dry. Pour clean water on area being cleaned and agitate one last time before extracting all the dirty remains with a wet vacuum system.

Note: Always allow used towels to completely dry before discarding. Once the coating and/or wax has been removed an additional deep cleaning may be necessary. For this procedure use the appropriate Miracle Cleaner as directed for each surface. (See the product chart). Heavy Duty Cleaning: To remove lime, hard water deposits, efflorescence,
grout haze, rust and other heavy dirt and grime use Phosphoric Acid Cleaner or GCFR (Grout & Concrete Film Remover) as directed. Do not use GCFR, Phosphoric Acid Cleaner or Sulfamic Acid Crystals on polished marble, limestone or any acid sensitive stone or tile. If an additional deep cleaning is necessary use Liquid Poultice cleaner as directed. All strippers and/or cleaners should be thoroughly rinsed with clean water and the materials allowed to dry.