Miracle Marble Conditioner, Quart

Coverage: 1,000 - 5,000 square feet per gallon (180 - 450 liters per 3.785 liters).
Container sizes: Gallon, quart, 32 oz. spray bottle.

APPLICATION:

Read entire label and PDS/MSDS before using. This product should be used directly from container and is not under any circumstances to be thinned or diluted with anything before use. For the best performance and protection Miracle Penetrating Sealer/Impregnator should be used as directed on all surfaces and grout before using Marble Conditioner or any other recrystallization formula. This will help resist darkening of light colored surfaces or grout lines. Miracle Penetrating Sealer/Impregnatorwill also provide water, stain and slip resistance. Make sure the surface is completely dry before using. Shake Marble Conditioner thoroughly and pour into a plastic trigger spray bottle. Once in spray bottle, shake contents frequently throughout operation. Spray lightly onto the surface being treated immediately buffing area with a Marble Master MM1000 (175 rpm/150lbs.) floor machine equipped with a #0, #1 or #2 steel wool pad. Work areas approximately 3' x 3' in size. Apply 2 -3 squirts to the surface, working area in a side to side motion until dry. Once one side of the steel wool pad becomes dirty, turn it over and use the other side. When several sections are completed the overall area should be buffed one last time with a clean dry steel wool pad. This will remove any swirl marks that might be present. Make sure that the steel wool pads, are clean and dry. All steel wool shavings should be removed with a dry dust mop once the area has been completed. Check the finish in day light conditions for your final evaluation. Use Marble Conditioner as often as traffic dictates, monthly, quarterly, annually. In heavily damaged areas, honing the surface with abrasives may be necessary prior to the use of Marble Conditioner in order to achieve desired results.
Special Note: It is also recommended that surfaces be honed with abrasives periodically in order to break the surface crystals that build on the surface with prolonged use. This is important in allowing the proper vapor transmission necessary to natural stone surfaces.