Coverage: 60 - 115 square feet per 6 oz. bottle (5 square meters per 14 milliliters).
Container sizes: 6 oz. bottle with applicator.
APPLICATION:
Read entire label and PDS/MSDS before using. Grout Sealer should not be diluted or thinned in any way. Grout Sealer should be used as is direct from approved container. Grout or mortar must be cured per manufacturers specification before applying Grout Sealer. Apply Grout Sealerwith it’s unique applicator tip directly to the joint for maximum stain resistance. Any excess sealer that gets on tile or stone surface should be wiped off with a clean towel before it dries. Be careful not to allow sealer to puddle on surface.
Existing Installation - Surface Preparation:
Grout or mortar surface must be dry and free of contaminants, including previously applied sealers, dirt, lime & hard water deposits, efflorescence, rust & other heavy dirt and grime.
Floor Coating/Wax Removal:
To remove existing coatings and/or waxes use Mira Strip or H2O Strip per the instructions.
Heavy Duty Cleaning: To remove lime and hard water deposits, efflorescence, rust and other heavy dirt and grime use GCFR (Grout & Concrete Film Remover), Phosphoric Acid Cleaner or Porcelain Ceramic Tile Cleaner following the instructions carefully. If an additional non acid deep cleaning is necessary use Liquid Poultice as directed. All strippers and/or cleaners should be thoroughly rinsed with clean water and the materials allowed to dry.
Light Duty Cleaning: Use Grout Cleaner, Mira Clean #1 or Counter Kleen as directed.
Residue Removal: To remove accumulated Grout Sealer residue, use Residue Remover as directed.
Existing Installation - Application Instructions: Follow the application instructions previously mentioned.