Miracle Poultice Plus Powder, 1lb

Coverage: Coverage will vary depending on density, porosity, texture, surface absorption, weather, time solution is left on the surface and application methods. Used as directed, Poultice Plus will clean
approximately 5 - 10 square feet per 1-pound container.
Container sizes: 1-pound, 5-pound and 40-pound containers.

APPLICATION:

Read entire label and PDS/MSDS before using. All previous applied sealers, coatings and/or waxes must be removed using Mira Strip or H2O Strip as directed. Mix Poultice Pluswith “distilled water” or appropriate chemical to form a peanut butter like paste. The paste should be pliable but not runny. Apply the paste directly to the stain approximately 1/4" - 1/2" thick. Overlap the stain by approximately 1/4"- 1/2". Cover the paste with plastic wrap and tape the plastic with “non marking” tape to create an airtight seal. Allow the paste to dry completely, approximately 24-48 hours. Remove the plastic wrap and scrap the dried paste from the substrate with a non scratching utensil like a plastic putty knife or spatula. Rinse off all residue with clean “distilled water”. If the stain is lighter but not completely removed repeat the same procedures. It may be necessary to use multiple applications to remove some stains.
Some stains can be removed more easily by mixing the appropriate chemical with Poultice Plus. Refer to the Miracle Sealants Company Stain Removal Guide for additional information.