Tile Brite Gray, 5lb

Coverage: Coverage will vary depending on density, porosity, texture, surface absorption, weather, time solution is left on the surface and application methods. Used as directed, Tile Brite will cover approximately 80 - 115 square feet per 1-pound container (7 - 11 square meters per pound).
Container sizes: 1-pound, 5-pound and 40-pound containers.

APPLICATION:

Read the entire label and PDS/MSDS before starting.

a. All previous applied sealers, coatings and/or waxes must be removed using Mira Strip or H2O Strip as directed.
b. If the grout is very dirty scrub using GCFR as directed.
c. If the floor is very dirty or old (typically 5 years or more), use Tile Restor first as directed for optimum results.
d. Apply a small amount of water to the tile and grout surface. Work in approximately 25 - 35 square feet at a time. Do not work large areas.
e. Sprinkle a handful of Tile Brite onto the wet surface (approximately 5 ounces per 25 square feet of tile).
f. Buff the Tile Brite creating a slurry with natural hair brush or pad. (A Marble Master or similar floor machine is preferred). Approximately 20 minutes per 25 - 35 square feet of tile.
g. Move slurry aside with a squeegee. Check for desired luster. Work longer for additional luster. When the desired luster is achieved, squeegee the Tile Brite slurry to the next section and add Tile Brite and water as needed. DO NOT ALLOW Tile Brite DRY ON THE SURFACE.
h. Remove excess slurry with a wet vacuum. Wet the surface with clean water and buff with the same brush pad. This procedure will remove any residue. DO NOT ADD MORE Tile Brite.
i. Rinse the surface with Mira Clean #1 and let area dry completely.