Miracle 511 Seal & Enhance Contractor Pack (4 Quarts)
Price: $161.00
Brief Description
Detailed Description
Specifications
NOTE: Contractor Packs may be removed from retail box and shipped as 4 loose quarts due to recent regulation changes. These changes will only effect Los Angeles, San Bernardino, Riverside and Orange County in the state of California.
511 Seal & Enhance Is a unique, solvent-base formula designed to eliminate the need to use an impregnator before using a color enhancer for maximum stain protection and superior color enhancement. 511 Seal & Enhance is safe for use on granite, marble, limestone, natural stone, slate, ceramic tile, quarry tile, grout, concrete and masonry surfaces. 511 Seal & Enhance will enhance the color and rejuvenate the appearance of tumbled, honed, acid-washed, sandblasted, flamed, textured, even polished stone and tile surfaces. In addition, 511 Seal & Enhance revitalizes old and worn stone and tile installations. It can be used successfully in both interior and exterior environments and is freeze/thaw resistant.
NOTE: Contractor Packs may be removed from retail box and shipped as 4 loose quarts due to recent regulation changes. These changes will only effect Los Angeles, San Bernardino, Riverside and Orange County in the state of California.
511 Seal & Enhance Is a unique, solvent-base formula designed to eliminate the need to use an impregnator before using a color enhancer for maximum stain protection and superior color enhancement. 511 Seal & Enhance is safe for use on granite, marble, limestone, natural stone, slate, ceramic tile, quarry tile, grout, concrete and masonry surfaces. 511 Seal & Enhance will enhance the color and rejuvenate the appearance of tumbled, honed, acid-washed, sandblasted, flamed, textured, even polished stone and tile surfaces. In addition, 511 Seal & Enhance revitalizes old and worn stone and tile installations. It can be used successfully in both interior and exterior environments and is freeze/thaw resistant.
Ready to Use Solvent Base Impregnator/Color Enhancer For:
• Granite • Limestone • Not for Concrete/Masonry
• Marble • Ceramic Tile • Polished Stone
• Natural Stone • Quarry Tile
• Slate • Grout
SPECIAL FEATURES:
• Superior Stain Protection • Interior/Exterior • One Step • Oil Resistant • Water Repellant • Will Not Yellow
• Enhances Color • Grout Release • Easy To Use • Lasts 3 - 5 Years • Good for Floors
Coverage: Approximately 250 - 4,000 square feet per gallon (25 - 400 square meters per 3.785 liters). Container sizes: Contractor Pak, quart, pint.
APPLICATION:
Read entire label and PDS/MSDS before using. 511 Seal & Enhance should not be diluted or thinned in any way. 511 Seal & Enhance should be used as directed from approved container. Follow the recommended installation methods and procedures of the Marble Institute of America, Building Stone Institute and the Tile Council of America. Allow new setting materials and grout to cure per manufacturers instructions prior to sealing.
Sealing as a Grout Release: To insure the best possible installation, 511 Seal & Enhance should be applied as a grout release before the grouting process. 511 Seal & Enhance will resist dye absorption, facilitate grout residue removal (up to 45% faster), and offer superior stain resistance during and after the construction process.
Directions: 1. Protect neighboring and adjacent surfaces including baseboards, wood, carpet, metal and landscaping. 2. Sweep or vacuum all dust, dirt and surface debris. 3. Insure the surface is clean, dry and free from contaminants. 4. Liberally apply an even application of 511 Seal & Enhance using a Miracle Sealants’ Mira Brush, clean white towel or natural fiber paint brush. Be careful not to allow sealants into open un-grouted joints. 5. Allow 511 Seal & Enhance to penetrate the surface for 3 - 5 minutes before removing all excess product before it dries on the surface with a clean towel. 6. A 2nd application is necessary and should be applied after the first has dried at least 1 hour. 7. Any excess product residue that may dry on the surface can be removed by reapplying product and wiping excess off immediately while wet, with a white terry cloth towel. Allow to cure 6 - 12 hours before grouting. 8. Proceed with the grouting process per the manufacturer’s instructions. 9. Clean all excess grout completely from the surface with a clean sponge and water. Take the time at this stage of the installation to carefully clean and detail. 10. Allow grout joints to dry per manufacturers specification. 11. If grout clean up is not performed effectively, additional cleaning may be necessary.
Grout Sealing: Once the grout has cured per the manufacturers recommendations, proceed with the sealing of the grout.
Directions: 1. Insure that the surface is clean, dry and free from contaminants. 2. Liberally apply an even application of 511 Seal & Enhance using a Miracle Sealants’ Mira Brush, clean white towel or a natural fiber paint brush directly to untreated grout joints. 3. Allow 511 Seal & Enhance to penetrate the surface for 3 - 5 minutes before removing all excess productwith a clean towel. 4. A 2nd application is necessary and should be applied after the first has dried at least 1 hour. 5. Any excess product residue that may dry on the surface can be removed by reapplying product and wiping excess off immediately while wet, with a white terry cloth towel. Allow to cure 6 - 12 hours before grouting. Finished area should be allowed to cure for 12 - 24 hours before putting into service. For optimum results keep area dry and free from stains for 72 hours after application.
Sign In
